Der opstod en fejl under afsendelsen af beskeden, prøv igen senere
Der opstod en fejl under afsendelsen af beskeden, prøv igen senere
Stil et spørgsmål
Forretningsområde
Sign in
EMT30 is developed to break up stratified heat, humidity and stagnant air. A plastic duct system can be mounted onto the EMT30 to move and mix air over long distances, thereby limiting temperature fluctuations during heating processes. The unique propeller design is self-cleaning and, together with air flow rectifiers, allows the highest efficiency to be reached. The housing and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 6-blade propeller is statically and dynamic balanced for low noise and low vibration. To improve aerodynamic efficiency, the fan has been developed in Munters R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois – USA.
Produkt information
Tekniske specifikationer
Sammenligning
Downloads
1.5 HP | |
---|---|
Propeller diameter | 760 mm |
Motor | 0.75 hp |
Airflow 0Pa | 14,680 m3/h |
Specific performance at 0Pa | 17.8 m3/wh |
1.0HP | |
Propeller diameter | 760 mm |
Motor | 0.5 hp |
Airflow 0Pa | 13,570 m3/h |
Specific performance at 0Pa | 20.2 m3/wh |
1.5 HP | |
---|---|
Propeller diameter | 760 mm |
Motor | 0.75 hp |
Airflow 0Pa | 14,680 m3/h |
Specific performance at 0Pa | 17.8 m3/wh |
1.0HP | |
Propeller diameter | 760 mm |
Motor | 0.5 hp |
Airflow 0Pa | 13,570 m3/h |
Specific performance at 0Pa | 20.2 m3/wh |
Ikke valid bruger identifikation
Ups! Der er noget gik galt. Prøv igen senere
Glemt password
Ikke valid bruger identifikation
Ups! Der er noget gik galt. Prøv igen senere
Check your email within a couple of minutes to reset your password, if you can’t see any incoming messages try to check into your spam folder!