Faça uma pergunta

Somos expertos

Enviaremos su consulta al contacto
de Munters de su país

Close

Ventiladores y Filtros de luz / Filtros de luz

LF30 Light filter

LF serie Filtros de luz

  • El marco está fabricado de chapa de acero galvanizado prelacado
  • Las lamas están fabricadas de polipropileno resistente con protección UV
  • Instalación simple y cómoda
  • Se suministra con clips especiales para un cómodo acople en los ventiladores Euroemme®. Solo se requiere una persona para montar un filtro de luz
  • Diseño especial de las lamas de plástico con reducida caída de presión
  • El aire atraviesa las lamas verticales asegurando su autolimpieza
  • Reducción de la entrada de luz y baja caída de presión. Reducción de la entrada de luz desde 7,000 lux para valores exteriores a 0.04 lux para valores interiores. Caída de presión de 2.5 Pa a una velocidad del aire de 1.5 m/s
  • Cada filtro de luz está probado, individualmente, para garantizar su calidad

 

Descripción del producto

A light filter is the ideal equipment required to reduce the light ingress through air stream passages. A typical example is the poultry industry. In order to obtain optimal breeder-bird performance in pullet houses, both light intensity and the number of light hours each day must be precisely controlled. By controlling lighting it is possible for breeder birds to reach sexual maturity at the optimal time and therefore to stimulate the beginning of egg-production. LF light filter is constructed of high grade polypropylene resistant to wear and tear, ultra violet rays from the sun, as well as the strong high-pressure washers used in farm cleaning techniques. The square frame housing the light filter vanes or media is made of a strong epoxy pre-coated and galvanized sheet-steel. Special designed clips provided with each kit, allow the mounting of a light filter directly onto a Euroemme® fan, on the suction side of the fan, as a perfect match in air-flow, efficiency and light lux reduction. To improve aerodynamic efficiency and reduce pressure losses the light filter design has been developed in Munters' R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Dept, University of Illinois – USA.


Somos expertos

Enviaremos su consulta al contacto
de Munters de su país