Mesajı gönderirken bir hata oluştu; lütfen daha sonra tekrar deneyiniz

Bir soru sorun

Nasıl yardım edebiliriz?

Beni genel başlangıç sayfasına götür
Seçerek bizim onaylayın Çerez politikaları

Kullanıcı kimliği geçersiz

Ups! Bir şeyler yanlış gitti. Lütfen daha sonra tekrar deneyiniz.

Kullanıcı kimliği geçersiz

Ups! Bir şeyler yanlış gitti. Lütfen daha sonra tekrar deneyiniz.

AirT-HighTemp-CS0085-GasMacUnit.jpg

Increased Temperature Control for a Paint Curing Oven

Gasmac Incorporated of Ontario, Canada manufactures painting systems used in industrial plants, and the company specifies Munters air-to-air heat exchangers as a regular feature on its lines.

In a recent application, Gasmac constructed and installed a new paint line for a steel processing plant in Slovakia to coat one side of steel sheeting with a decorative finish. The coating requires curing in an oven, and because the process uses solvent-based paint, the plant needed to incinerate fumes emanating during curing.

Gasmac devised a system that uses a natural-gas-fed burner both to heat the oven and incinerate the off-gas fumes. A Munters Thermo-Z® heat exchanger captures exhaust heat at 1400°F to preheat ambient air to 1201°F at the inlet for combustion.

Using this arrangement allowed Gasmac to specify a smaller burner than would otherwise have been required, reducing fuel consumption by 85%. The system also allows more control of the oven temperature and, most importantly, saves fuel for the steel company.

Hızlı greçekler

  • Energy cost savings
  • More accurate oven temperature control
  • Lower capital cost for required burner