Ask a question!




Fans & light filters / Extraction Fans

Euroemme® EC50 Cone fan

EC Extraction Fans

  • 高氣流和高能效;
  • 風扇罩、錐面、文丘裡管均採用名為Munters Protect的耐蝕材料制成;
  • 蒙特獨有的特殊保護錐形設計可最優化地使用安裝空間(EC52);
  • 採用專利技術的懸挂式進風門開啟裝置(EC52);
  • 所有電機均通過100%質量控制測試;
  • 可選用的傳動帶張緊裝置可增加三角皮帶的使用壽命和減少維護成本;
  • 可提供4種的圓錐形出風口(EC52)供客戶選用。


  • Belt tensioner


EC50 cone fan, a 50" fan equipped with cone discharge, is the ideal fan for high air-flow capacity at high static pressures and low energy consumption. The unique propeller design is self-cleaning and allows the highest efficiency to be reached, while the discharge cone boosts the airflow dramatically. The square fan housing, cone discharge and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 3-blade propeller is statically and dynamic balanced for low noise and low vibration. The propeller is available in stainless steel, galvanised steel and precoated, galvanised steel. To improve aerodynamic efficiency and reduce pressure losses the cone fan design has been developed in Munters' R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois – USA. Propeller, cone discharge and shutter The propeller is attached to a large v-belt pulley in which is embedded a double ball bearing protected against water. The belt transmission ensures low propeller rpm, which ensures high efficiency, low energy consumption as well as low noise. The cone-discharge is made in 4 separate pieces to assist with knock-down transportation, and all in galvanised steel. The shutter is made of galvanised steel for all models, which is stronger than aluminium and plastic. The fan shutter is tightly closed when the fan is not working preventing any air leakage through the fan. The patented centrifugal system prohibits the shutter from being closed by air pressure, keeping the efficiency of the fan at a peak at all times by keeping the

shutter fully and firmly opened. The shutter does not have to be cleaned regularly as dust does not affect its opening and closing movement. All the plastic parts are made of acetalic plastic with UV protection.

  • 技術參數
  • 下載
1.0 HP
1,270 mm
1.0 hp
40,420 m3/h
34,200 m3/h
38.6 m3/wh
1.5 HP
1,2700 mm
1.5 hp
46,260 m3/h
42,200 m3/h
31.8 m3/wh