AT_case_drop.jpg

Dehumidification in pumping stations and water management

Dehumidification in pumping stations and water management is very important to control environmental conditions and prevent problems with condensation and oxidation.

Moisture problems

Moisture is invisible but manifests when it condenses on the walls, pipes and other surfaces.

When moist air comes in contact with a cold surface, the water evaporated in the air becomes liquid. To avoid condensation, we reduce the relative humidity level with low dewpoint.

In the water treatment plants, it is very common that cold surfaces present condensation problems.

Munters desiccant dehumidifiers help create an environment free of condensation and work effectively at any temperature. If there is condensation on metal surfaces, problems will arise from oxidation and corrosion. If the relative humidity is above 60%, ​​oxidation problems increase rapidly.

The growth of bacteria is another problem that can arise when the RH is above 70%.

High humidity can also cause problems in electronic equipment, for example in the control and monitoring devices.

Dehumidification in cold areas

The traditional way of removing moisture is using a simple cooling system. However, a cooling unit does not work in cold areas. The capacity of the dehumidifier is decreased at low temperature. Below 15°C, a dehumidifier for cooling is ineffective. The technique used by the desiccant rotor is the reason why Munters does not have this limitation and, therefore, is the best alternative for the treatment plant and pumping stations.

我们该怎样帮助您?

By selecting you approve our cookie policies

污染控制与VOC减排

/sites/default/files/default_images/20191105102856981.jpg

Your Perfect Climate

//vod.munters.cn/8cc75d7728b34bea988c087e429a9439/be325602ddac9d649f8e66a583c2f1e9-sd.mp4

汽车

蒙特可提供专门用于汽车行业的方案,可确保温度和湿度恒定,甚至可达到精确的规范要求。我们的产品应用领域十分广泛。

电子产品

整体环境管控对电子加工运行过程和提供任务关键型服务的设施至关重要。