Mesajı gönderirken bir hata oluştu; lütfen daha sonra tekrar deneyiniz
Mesajı gönderirken bir hata oluştu; lütfen daha sonra tekrar deneyiniz
Bir soru sorun
İş alanları
Oturum aç
The Vapor Inlet Device (VID) is generally required whenever a very high-velocity or unevenly distributed vapor flow is anticipated. The purpose of VID is to decrease the momentum of the vapor feed and evenly distribute the gas across the vessel cross section. The same is obtained by dividing the feed mixture into horizontal streams. This reduces the vertical vapor velocity within a short distance of its discharge into the tower.
Typically it is located in the bottom section of the column where reboiler feed is entering the tower or between the tray and packing section. Kinetic energy of the inlet vapor and the vapor fraction, must be considered while designing these devices.
The installation is generally in horizontal inlets in a vertical column.
Kullanıcı kimliği geçersiz
Ups! Bir şeyler yanlış gitti. Lütfen daha sonra tekrar deneyiniz.
Parolanızı mı unuttunuz?
Kullanıcı kimliği geçersiz
Ups! Bir şeyler yanlış gitti. Lütfen daha sonra tekrar deneyiniz.
Check your email within a couple of minutes to reset your password, if you can’t see any incoming messages try to check into your spam folder!