Biz uzamanlarız

Mesajı gönderirken bir hata oluştu; lütfen daha sonra tekrar deneyiniz

Bir soru sorun

ClearLam_2020 Munters Logo.jpg

Free heat from an incinerator

At a large midwestern printing plant, solvents used in ink from presses generate harmful vapors. Two regenerative thermal oxidizers, with a combined 70,000 CFM exhaust, incinerate the VOCs. But rather than let all that heat go to waste up a stack, the company wisely uses it to heat its facility.

Two Munters Thermo-Z® air-to-air heat exchangers, one on each incinerator, capture the exhaust heat and use it to heat outside air for plant makeup air in winter. Each heat exchanger is part of a complete packaged heat recovery system that also includes supply and exhaust fans, dampers, and filters.

Under design conditions, the systems heat outdoor air from -10°F to 130°F using 250°F exhaust from one incinerator and 350°F exhaust from the other. Combined, they can transfer over 10,400,000 BTUs per hour. The temperature to the space is controlled to a consistent 130°F by modulating the hot gas flow through the heat exchanger. Munters air-to-air heat recovery system successfully helped the printing plant recycle energy and save on costs.

Hızlı greçekler

  • Provides free heat, eliminating building heat costs
  • Energy savings of $250,000 annually
  • Eliminates negative pressure problems
  • One-year payback

Nasıl yardım edebiliriz?

Beni genel başlangıç sayfasına götür
Seçerek bizim onaylayın Çerez politikaları

Kullanıcı kimliği geçersiz

Ups! Bir şeyler yanlış gitti. Lütfen daha sonra tekrar deneyiniz.

Kullanıcı kimliği geçersiz

Ups! Bir şeyler yanlış gitti. Lütfen daha sonra tekrar deneyiniz.