Låt oss hjälpa dig

Ett fel uppstod när meddelandet skickades, vänligen försök senare

Ställ en fråga

Hur kan vi hjälpa dig?

Ta mig till den generella startsidan.
Genom att välja godkänner du vår cookie policy

E-postadressen är ogiltig

Oops, någonting gick fel! Försök igen om en stund.

E-postadressen är ogiltig

Oops, någonting gick fel! Försök igen om en stund.

AT_Case_Fuktkvot.jpg

Timber drying at Galparquet

Munters assures timber quality thanks to our dehumidification solutions.

The moisture content in the timber is important because
* Relative Humidity (RH) affects the final product QUALITY causing deformities and stains
* HYGIENE problems due to fungus growth
* Drying timber decreases the storage and transport COSTS because of the weight and volume reduces

Timber drying process
The timber drying process is carried out in two steps:
* Drying with ambient air: we can reduce the moisture content in terms of product weight between 65% - 30%
* Drying in chambers: with Munters dehumidification systems we can reduce the moisture content to between 8% - 12%, depending on the timber and its use.

Our experience
Munters dehumidification systems are very important to Spanish company - Galparquet, to assure their timber quality.
With the installation of two MXT9000 units, Munters have created the perfect ambient conditions and reduced the humidity to around 40%.

Snabbfakta

  • Constant and higher quality, avoiding deformities and stains
  • No fungus growth
  • No over drying, splitting and warping
  • Cost savings for storage and transport
  • Higher productivity