메시지 전송 시, 오류가 발생하였습니다. 재시도하십시오

문의 하십시오

무엇을 도와드릴까요?

시작 페이지로 연결
By selecting you approve our 쿠키 정책

아이디 또는 비밀번호를 다시 확인하세요

오류. 나중에 다시 시도하십시오

아이디 또는 비밀번호를 다시 확인하세요

오류. 나중에 다시 시도하십시오

AirT-High-Temp-CS0088-TransCanadaUnit.jpg

Heat Exchanger Increases Turbine Horsepower

TransCanada Pipelines pumps natural gas through underground pipelines from production facilities in western Canada to consumers in eastern Canada and midwestern U.S. states. Gas generators drive power turbines, which in turn drive compressors that compress natural gas to transmit it across the country.

Pipeline engineers learned long ago that these gas generators run more efficiently with their inlet air above 70ºF. “Once you hit cold weather, you lose efficiency,” says Marie Standing, senior mechanical engineer with TransCanada. To remedy low efficiencies during winter months, a Munters Thermo-Z® heat exchanger was installed on a turbine exhaust at the Compressor Station in Saskatchewan. The heat exchanger recovered heat from the turbine exhaust and used it to preheat a portion of the inlet air to 385ºF. This in turn mixed with the remaining cold inlet air to bring the entire inlet airstream up to 75ºF, reducing the horsepower needed to operate.

However, TransCanada also learned that because the turbines ramp up quickly to an operating temperature of over 1000ºF, turbine operation created a severe environment for heat exchangers. They originally used a heat exchanger from another manufacturer, but it failed after only three months of operation.

Standing says the quick ramp-up is inherent in turbine operation and hard to control. TransCanada couldn’t reduce the startup rate because it would have held back operations on each startup. In response, Munters designed a special Thermo-Z heat exchanger that accommodates rapid thermal expansion. A heat exchanger that can withstand such severe conditions is uncommon in the industry.

TransCanada now uses the heat exchanger for three to five months out of the year, and as Standing says, “It may not sound like much, but when you add up the number of days, it’s quite a bit.” With the success of this trial, the company plans to add a heat exchanger to other compressor station turbines.

기본 정보

  • Increased turbine efficiency
  • Compact design
  • Accommodates rapid temperature ramp
  • Utilization of existing "free" heat source
  • Low pressure drop