Wir sind Experten

Beim Versenden trat ein Fehler auf, bitte versuchen Sie es später erneut

Fragen Sie uns


Tyson Controls Condensation with Desiccant Dehumidification

Tyson Foods, Inc., founded in 1935 with headquarters in Springdale, Arkansas, is the world’s second largest processor and marketer of chicken, beef, and pork products. The company produces a wide variety of protein-based and prepared food products and is the recognized market leader in the retail and foodservice markets it serves. Tyson provides products and service to customers throughout the United States and more than 100 countries.

At Tyson’s Nashville, Arkansas plant, 200,000 birds are processed per day. The production staff at the plant was spending a significant amount of time removing condensation that was forming on overhead pipes and ceilings in the proximity of the
bird chiller within the evisceration area. All condensation needed to be removed after sanitation and prior to the start of processing. “We were hanging plastic everyday over our chiller. The air temperature difference in this area was causing the ceiling to sweat,” says Mike Hanson, plant manager for the facility. “We employed two people per shift to mop condensation around the chiller area.”

In an attempt to eliminate condensation, fans were added to increase the airflow in the evisceration area. This often brings in air at higher humidity levels, adding moisture and creating airflow imbalances that can increase condensation formation. Condensation may also be found in other areas of the plant due to the changing airflow patterns. Munters was contacted to design and manufacture a condensation control system that would eliminate the overhead condensation in this area.

The addition of louvers and fans in various locations had changed the airflow patterns throughout the processing areas. An airflow test and balance was conducted to determine the existing airflow patterns and the corrective actions required to achieve proper airflows. In general, air should flow from further processing to evisceration and be exhausted from the pick scald area.

After analyzing the test and balance report, a 22,000 CFM system with ammonia cooling and desiccant dehumidification was selected. The system was equipped with PowerPurge®, Munters patented energy recovery system. Using PowerPurge resulted
in energy savings of approximately 35% over a conventional desiccant system.

Within hours of starting the Munters system, the condensation began to disappear. “Since installing the dehumidification equipment, we have not had to hang plastic or have the two people per shift to control the condensation. We are not having to dry the ceilings in the morning following sanitation,” says Hanson. “So far we are very pleased with the results and will use this technology in the future to help eliminate condensation.” Hanson is now looking at other areas within the Nashville plant where dry air can help with moisture related problems.

Schnelle Fakten

  • USDA Compliance
  • Reduced Manual Labour
  • Reduced downtime
  • Increase production
  • Reduced Microbial Count
  • Reduced Defrost Cycles

Wie können wir Ihnen helfen?

Bitte leiten Sie mich zur allgemeinen Startseite weiter.
Durch Ihre Auswahl stimmen Sie unseren Cookie-Richtlinien zu

Ungültige Benutzerkennung

Es ist ein Fehler ist aufgetreten! Bitte versuchen Sie es später noch einmal.

Ungültige Benutzerkennung

Es ist ein Fehler ist aufgetreten! Bitte versuchen Sie es später noch einmal.