Der opstod en fejl under afsendelsen af beskeden, prøv igen senere
Der opstod en fejl under afsendelsen af beskeden, prøv igen senere
Stil et spørgsmål
Forretningsområde
Munters anvender cookies for at garantere og forbedre brugen af hjemmesiden. Du kan altid slette cookies fra Munters eller læse mere om cookies
EC50 cone fan, a 50" fan equipped with cone discharge, is the ideal fan for high air-flow capacity at high static pressures and low energy consumption. The unique propeller design is self-cleaning and allows the highest efficiency to be reached, while the discharge cone boosts the airflow dramatically. The square fan housing, cone discharge and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 3-blade propeller is statically and dynamic balanced for low noise and low vibration. The propeller is available in stainless steel, galvanised steel and precoated, galvanised steel. To improve aerodynamic efficiency and reduce pressure losses the cone fan design has been developed in Munters' R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois – USA. Propeller, cone discharge and shutter The propeller is attached to a large v-belt pulley in which is embedded a double ball bearing protected against water. The belt transmission ensures low propeller rpm, which ensures high efficiency, low energy consumption as well as low noise. The cone-discharge is made in 4 separate pieces to assist with knock-down transportation, and all in galvanised steel. The shutter is made of galvanised steel for all models, which is stronger than aluminium and plastic. The fan shutter is tightly closed when the fan is not working preventing any air leakage through the fan. The patented centrifugal system prohibits the shutter from being closed by air pressure, keeping the efficiency of the fan at a peak at all times by keeping the
shutter fully and firmly opened. The shutter does not have to be cleaned regularly as dust does not affect its opening and closing movement. All the plastic parts are made of acetalic plastic with UV protection.
Tilgængelig i Mexico, Brazil, China, United Kingdom, Sweden, Finland, Spain, Denmark, Korea, France, Italy, Netherlands, Australia, Russia, India, Thailand, Turkey, Portugal, Germany, Japan, Poland, Belgium, South Africa, Ireland, United Arab Emirates, Singapore
Produkt information
Tekniske specifikationer
Valgmuligheder
Sammenligning
Downloads
1.0 HP | |
---|---|
Propeldiameter | 1,270 mm |
Motor | 1.0 hp |
Luftstrøm ved 0Pa | 40,420 m3/h |
Luftstrøm ved 25Pa | 34,200 m3/h |
Specifik ydelse ved 0Pa | 38.6 m3/wh |
1.5 HP | |
Propeldiameter | 1,2700 mm |
Motor | 1.5 hp |
Luftstrøm ved 0Pa | 46,260 m3/h |
Luftstrøm ved 25Pa | 42,200 m3/h |
Specifik ydelse ved 0Pa | 31.8 m3/wh |
Assembly Manual EC Series
Product sheet EC50_EN
Product sheet EC50_ES
Product sheet EC50_FR
Product sheet EC50_IT
Product sheet EC50_RU
Product sheet EC50_TH
Product sheet EC50_TU
1.0 HP | |
---|---|
Propeldiameter | 1,270 mm |
Motor | 1.0 hp |
Luftstrøm ved 0Pa | 40,420 m3/h |
Luftstrøm ved 25Pa | 34,200 m3/h |
Specifik ydelse ved 0Pa | 38.6 m3/wh |
1.5 HP | |
Propeldiameter | 1,2700 mm |
Motor | 1.5 hp |
Luftstrøm ved 0Pa | 46,260 m3/h |
Luftstrøm ved 25Pa | 42,200 m3/h |
Specifik ydelse ved 0Pa | 31.8 m3/wh |
Assembly Manual EC Series
Product sheet EC50_EN
Product sheet EC50_ES
Product sheet EC50_FR
Product sheet EC50_IT
Product sheet EC50_RU
Product sheet EC50_TH
Product sheet EC50_TU
Ikke valid bruger identifikation
Ups! Der er noget gik galt. Prøv igen senere
Glemt password
Ikke valid bruger identifikation
Ups! Der er noget gik galt. Prøv igen senere
Check your email within a couple of minutes to reset your password, if you can’t see any incoming messages try to check into your spam folder!